UCrete - UD200 - Heavy Duty Polyurethane Screed

Request a call back today

Ucrete UD200 is a unique HD Polyurethane resin floor with exceptional resistance to aggressive chemicals, heavy impact and temperatures up to 150°C

Ucrete UD200 Datasheet

Flooring Benefits

Need Expert Advice?

South Africa
Call us: + 27 (0) 82 3800 959


With high mechanical strengths and a low elastic modulus, Ucrete UD200 is very resilient and able to withstand severe impact loads. While no material is indestructible and surface chipping may occur, brittle modes of failure resulting in cracking and disbondment are unknown with Ucrete floors


Ucrete Industrial Flooring is extremely tolerant to residual substrate moisture and can be installed directly onto 7 day old concrete, or onto old good quality concretes with high moisture contents without the use of special primers, provided there is a functioning DPM within the structure. This enables rapid construction programmes to be maintained and facilitates refurbishment work in wet process areas.
Epoxy surface DPMs should not be used as they soften under high temperature conditions and will lead to floor failure.


Ucrete UD200 exhibits zero absorption when tested to CP.BM2/67/2


Ucrete flooring systems are accredited for use in facilities operating HACCP based food safety systems.
Ucrete UD200 is readily cleaned using industry standard cleaning chemicals and equipment.
Tests undertaken by Campden Technology Ltd on the removal of Acinetobacter Calcoaceticus and Listeria Monocytogenes concluded that the cleanability of Ucrete UD200 ‘compares well with the cleanability of food contact surfaces such as plastics and stainless steel’.
Regular cleaning and maintenance will enhance the life and appearance of any floor. Ucrete UD200 is readily cleaned with industry standard cleaning chemicals and equipment. Please consult your local cleaning chemicalor equipment supplier.


The Ucrete UD200 surface profiles have coefficient of friction as determined to EN 13036 Part 4 with 4S rubber on the wet floor as follows:
Ucrete UD200 40 – 45

The Ucrete UD200 surface profiles conform to DIN51130 as follows:
Ucrete UD200 R11 V Optimum slip resistance can only be maintained with regular cleaning.

Need this floor N-O-W??

Call N&S (Newton and Strever) when you have to meet the highest standards – in every respect. You’ll be floored with what we have to offer!